Since the beginning of the Stone adventure we offered our own skins, the feedback was quite positive but something more was missing.
This skins fits all splitboards on the world market. You will certainly have to cut them in the drop.
They are exactly the same as our STONY in construction except that at the nose you have a Standard Tip, a classic rectangular stainless steel attachment system & in the tail you have what is called a Butterfly, a triangle that fits into the corner of the tail of the splitboard. Several sizes are available, so check the length you need.
A cutting kit is provided to cut your skins across the width.
So we took a look around & decided to invest in new technology. To make custom, to have a glue ultra efficient & ultra durable.
Aren't you lucky to have a Stone splitboard? We thought of you anyway. We have WORLDFIT splitboard skins from another brand than STONE!
With the cutting kit you will be able to cut them in the width.
The nose attachment is classic, all nose shapes fit in this attachment.
At the tail the butterflies will fit all splitboard tail shapes on the market.
The fit will therefore be optimal in both length and width. Several skin sizes are available depending on the size of your splitboard. Don't be mistaken!
On freshly groomed slopes, fresh powder or a mix of both, with Stone Snowboards skins, freedom is in your hands.
The top quality Mixmohair is suitable for all types of terrain and all types of snow. It offers perfect durability and grip, even for multiple ascents.
The new KOHLA Fiberseal Technology produces a thin, very robust and completely waterproof skin which, thanks to its small size, fits all hiking backpacks.
Maximum flexibility is also ensured by the "Smart Glue" used in STONY & WORLDFIT skins.
A newly developed advanced adhesive that guarantees easy handling and easy removal of the skins, even when putting them on and taking them off repeatedly.
In addition, these skins are suitable not only for all types of snow, but also for a wide variety of splitboard types. So you will have maximum freedom for your splitboard rides!
The main advantage of the new Fiber Seal construction is a 3-layer system without a cotton-polyester layer on the bottom, which means that it is much more water-resistant than cotton.
We use "Smart Glue" because in the end it is the one that best fits all Stoners and is the most durable over time. Our experience has allowed us to find the right compromise between skins that peel off too easily (those from past seasons) & skins that are difficult to peel off (those we have already tested on skis for example). Basically our new skins are a mix of both. For example: :
Vacuum (adhesion of the skins) = about 3-4 kg of energy to separate (sometimes too little, especially in difficult conditions, or 3-4 times a day)
Hot-melt Standard (traditional glue): 17-18kg of energy to separate the skins (especially for women, sometimes too difficult to gather the skins together and you can destroy the surface if you don't take the protective film.
Smart Glue (new exclusive development for Stone by Kohla): about 7-8kg of energy to separate the skins (we think this is the ideal standard for anyone who wants the perfect combination of easy handling and sufficient safety for longer or more difficult split hikes)
These figures are always measured on a 110 mm wide and 170 cm long board!
Skins are :
Adjustable with the cutting kit & the Butterflies to adjust the length.
Mohair blend 65% 35% nylon
Smart Glue Technology
The skins can be glued back together
Stone Design made in Austria by Kohla